# How do you make a mechanical keyboard quieter? The Keychron V5 Max at $109.99 (keychron.com, unchanged across the 2026-08-26 and 2026-09-06 checks, in stock on both) is the quieting platform to buy: it is a gasket-mounted board with hot-swap sockets that ships fully assembled with switches and double-shot PBT keycaps, so installing a quieter switch is a swap rather than a second full purchase. The Keychron Q1 Pro is the more open platform on paper — Keychron states 3-pin and 5-pin MX compatibility (Gateron, Cherry MX, Kailh) on a full CNC-aluminum gasket case — but the priced variant is barebone, it moved up to $167.99 at the 2026-09-06 re-check, and it was out of stock at keychron.com on that date. The NuPhy Halo75 V2 is the only board here that already ships a factory silent switch, the Cherry Silent Red at 45gf, at A$229.00 (nuphy.com.au, 2026-09-06) rather than a first-party NuPhy US price — an Australian-dollar figure that cannot be set against the US-dollar prices above, and it too was out of stock at that vendor on 2026-09-06. Caveats, and they are the core of this answer: no technique in this corpus has a measured decibel-reduction figure attached, so socket type, mount type and plate material are construction facts here and not noise numbers; and prices and stock change without notice. State the limit first: no technique in this corpus has a measured decibel-reduction figure attached to it. What follows is grounded only in verified socket type, mount type and plate material — not acoustic testing — and it claims no specific dB improvement. Prices and stock are the 2026-09-06 re-check recorded in products.json unless a line names 2026-08-26 instead. Lever one is the switch swap, and it only works if the board is hot-swap in the first place. The V5 Max is, and it is the only hot-swap board in this set that was in stock at its maker's own store on 2026-09-06, at $109.99, already carrying switches and double-shot PBT keycaps — so the cost of trying a quieter switch is the switches alone. One honest gap: Keychron publishes a bare 'hot-swappable' for the V5 Max where it publishes an explicit 3-pin and 5-pin MX compatibility list for the Q1 Pro, so the V5 Max's socket openness is stated less precisely, and this corpus does not resolve it. What you give up against the Q1 Pro, stated plainly: a full CNC-aluminum case in place of the V5 Max's ABS body and PC plate, that explicit MX pin-compatibility list, and a rated battery of up to 300h backlight off against the V5 Max's up to 190h. What you get back: $58.00 at the 2026-09-06 prices ($109.99 against $167.99), a board that includes the switches and keycaps the barebone Q1 Pro does not, and one that was actually in stock on that date where the Q1 Pro was not. The Halo75 V2 is the one board that removes the swap question on day one: its factory Cherry Silent Red 45gf option is one of four switches NuPhy sells for it, on a 3/5-pin MX-style hot-swap socket, fully assembled at A$229.00 (nuphy.com.au, 2026-09-06). Two limits on that figure: it is an Australian-dollar price at an Australian store rather than a first-party NuPhy US one, so it cannot be set against the US-dollar prices above, and that vendor showed the board out of stock on that date. The Royal Kludge RK84 at CA$85.00 (rkgamingstore.com, 2026-09-06, still in stock) shows the ceiling on a budget hot-swap board: the socket is hot-swappable, but Royal Kludge only sells RK Blue, Brown and Red switches for it, a narrower lineup than the open MX-standard compatibility Keychron markets for the Q1 Pro, and its keycaps are ABS rather than PBT. Its Canadian-dollar reading cannot be set against the US-dollar prices above, so this answer no longer calls it the cheapest hot-swap platform in the set — only the narrowest. Lever two is mount type, a documented construction fact rather than a decibel claim: the V5 Max, the Q1 Pro and the Halo75 V2 all use gasket mounts, which decouple the plate from the case, while the RK84 uses a tray-style removable frame. This corpus has no acoustic test proving one mount measures quieter than the other — treat it as a build fact, not a noise number. Who this is NOT for: this lever does nothing for boards that are not hot-swap in the first place. The Keychron C3 Pro, the priced K8 Pro and K3 Pro SKUs, the Logitech G Pro X TKL and the Logitech MX Mechanical all carry no hot-swap sockets in this catalog, so switch-swapping is not an option on them at all — buy hot-swap first if quieting the board later matters to you. ## Spec comparison | Spec | [Keychron V5 Max](https://answers.gainlyai.org/products/keychron-v5-max) | [NuPhy Halo75 V2](https://answers.gainlyai.org/products/nuphy-halo75-v2) | [Royal Kludge RK84](https://answers.gainlyai.org/products/rk-rk84) | [Keychron Q1 Pro](https://answers.gainlyai.org/products/keychron-q1-pro) | | --- | --- | --- | --- | --- | | layout | 96% | 75% ANSI, 83-key | 84-key, 75% compact layout | 75%, full metal, gasket mount | | connectivity | 2.4GHz wireless + Bluetooth 5.1 + USB-C wired | 2.4GHz / Bluetooth 5.0 / wired USB-C | tri-mode: Bluetooth 5.0, 2.4GHz wireless, USB-C wired | Bluetooth 5.1, up to 3 devices + USB-C wired | | battery | 4000mAh li-polymer; up to 190h backlight off, 100h RGB (lowest brightness); ~5h charge time | 4000mAh; 9-91h all lights on, 140-200h homing bars only, up to 307h lights off (NuPhy lab test) | 3750mAh; rated ~200hr in 2.4GHz mode with backlight OFF (not typical mixed use), 6-7hr full charge | 4000mAh li-polymer; up to 300h backlight off, 100h RGB (lowest brightness) | | hot_swap | yes | yes, 3/5-pin MX-style socket | yes | yes (3-pin & 5-pin MX compatible: Gateron, Cherry MX, Kailh, etc.) | | firmware | QMK/VIA | | | QMK/VIA | | keycaps | Double-shot PBT, OSA profile | mSA profile, south-facing LED cutouts | ABS double-shot | KSA double-shot PBT, not shine-through, on Fully Assembled version; Barebone variant priced ships without keycaps | | switch_type | Gateron Jupiter Red (this variant); also offered in Brown/Banana | | | Keychron K Pro mechanical on Fully Assembled version; Barebone variant priced ships without switches | | mount_type | Gasket mount | gasket mount, POM plate | removable frame, tray-style case | Gasket mount | | case_material | ABS plastic (body), PC plate | | | Full CNC machined aluminum | | os_support | Windows/macOS/Linux | Windows, macOS, Linux, Android, iOS | Windows XP/2000/7/8/10, macOS, iOS, Android | macOS/Windows/Linux | | polling_rate | 1000Hz (2.4GHz & wired) / 90Hz (Bluetooth) | 1000Hz (2.4GHz and wired), 125Hz (Bluetooth) | | 1000Hz wired / 90Hz wireless | | knob | Yes (rotary volume/media knob) | | | | | variant_priced | Fully Assembled Knob / Carbon Black / Gateron Jupiter Red | | | Barebone Knob / Carbon Black / Barebone (no switches or keycaps included) | | switches | | NuPhy factory switches (Mint 37gf linear, Raspberry 46gf linear, Lemon 55gf tactile, Cherry Silent Red 45gf) | | | | backlight | | south-facing RGB, 40+ modes | RGB, 21 onboard lighting modes, 5 brightness levels (official spec; Tom's Hardware counted 19 modes on its review unit) | South-facing RGB LED | | switchOptions | | | RK Blue, RK Brown, RK Red (hot-swappable) | | | weight | | | 803.5g (1.77lb) per Tom's Hardware; official RK spec table lists 0.79kg | | | dimensions | | | 315 x 125 x 39mm per official RK spec table (Tom's Hardware lists 315 x 125 x 40mm) | | | software | | | RK DIY software (onboard macro/lighting customization) | | ## Sources - [Keychron official product page — Q1 Pro](https://www.keychron.com/products/keychron-q1-pro-qmk-via-wireless-custom-mechanical-keyboard?ref=jfbbnxdn) (2026-08-26) - [NuPhy AU official product page — Halo75 V2 (nuphy.com US checkpointed; regional storefront used instead)](https://nuphy.com.au/products/nuphy-halo75-v2) (2026-08-26) - [Keeb-Finder price/spec aggregator — Halo75 V2 (market-listing price source)](https://keeb-finder.com/keyboards/halo75-v2-qmk-via-wireless-custom-mechanical-keyboard) (2026-08-26) - [RK Gaming official store — RK84 product page](https://rkgamingstore.com/products/rk84-75-percent-keyboard) (2026-08-26) - [Tom's Hardware — Royal Kludge RK84 review](https://www.tomshardware.com/reviews/royal-kludge-rk84) (2026-08-26) - [Keychron official product page — V5 Max](https://www.keychron.com/products/keychron-v5-max-qmk-via-wireless-custom-mechanical-keyboard?ref=jfbbnxdn) (2026-08-26) - Corpus re-check 2026-09-06 — products.json priceHistory and availability (vendors keychron.com, logitechg.com, rkgamingstore.com) (2026-09-06) Last updated: 2026-09-10 Prices last checked 2026-09-06 ## Where to buy - [Check price at Keychron for Keychron V5 Max](https://answers.gainlyai.org/t/keybazaar/keychron-v5-max/a:qb-how-to-make-quieter/1794839694/a5671554d0b0.1dacbc4fccdc2cda10e6a99389b283a9) - [Check price at Royal Kludge for Royal Kludge RK84](https://answers.gainlyai.org/t/royal-kludge/rk-rk84/a:qb-how-to-make-quieter/1794839694/f550c0d47f63.ebdd61bd81950d4a0d9541925d9d97a0) - [Check price at Keychron for Keychron Q1 Pro](https://answers.gainlyai.org/t/keybazaar/keychron-q1-pro/a:qb-how-to-make-quieter/1794839694/2a575c6f68a9.baa68eeff2ac491157cce8fda8da6e1a) Affiliate links: we may earn a commission at no extra cost to you. [How we make money](https://answers.gainlyai.org/about).